Mapping wildland-urban interfaces at large scales integrating housing density and vegetation aggregation for fire prevention in the South of France

Every year, more than 50,000 wildland fires affect about 500,000 ha of vegetation in southern European countries, particularly in wildland-urban interfaces (WUI). This paper presents a method to characterize and map WUIs at large scales and over large areas for wildland fire prevention in the South of France. Based on the combination of four types of building configuration and three classes of vegetation structure, 12 interface types were classified. Through spatial analysis, fire ignition density and burned area ratio were linked with the different types of WUI. Among WUI types, isolated WUIs with the lowest housing density represent the highest level of fire risk

Land cover analysis in wildland-urban interfaces according to wildfire risk: a case study in the South of France

Each year, forest fires destroy about 500,000 ha of vegetation in Europe, predominantly in the Mediterranean region. Many large fires are linked to the land transformations that have taken place in the Mediterranean region in recent decades that have increased the risk of forest fires. On the one hand, agricultural fallows and orchards are slowly being colonized by vegetation, and on the other hand, the forest is not sufficiently used, both of which result in increased accumulation of fuel. In addition, urbanization combined with forest extension results in new spatial configurations called wildland-urban interfaces (WUI). WUI are commonly defined as areas where urban areas meet and interact with rural lands, wildland vegetation and forests. Spatial analyses were performed using a WUI typology based on two intertwined elements, the spatial organization of homes and the structure of fuel vegetation. The organisation of the land cover in terms of representativeness, complexity or road density was evaluated for each type of WUI. Results showed that there were significant differences between the types of WUI in the study area. Three indicators (i) fire ignition density, derived from the distribution of fire ignition points, (ii) wildfire density, derived from the distribution of wildfire area and (iii) burned area ratio, derived from the proportion of the burned area to the total study area were then compared with each type of WUI. Assuming that the three indicators correspond to important aspects of fire risk, we showed that, at least in the south of France, WUI are at high risk of wildfire, and that of the different types of wildland-urban interfaces, isolated and scattered WUI were the most at risk. Their main land cover characteristics, i.e. low housing and road densities but a high density of country roads, and the availability of burnable vegetation such as forested stands and shrubland (garrigue) explain the high fire risk. Improving our knowledge of relationships between WUI environments and fire risk should increase the efficiency of wildfire prevention: to this end, suitable prevention actions and communication campaigns targeting the types of WUI at the highest risk are recommended

Low loss silicon waveguides for the terahertz spectral region

Chip scale terahertz dielectric waveguides, consisting out of high resistivity silicon as a core material have been fabricated. The waveguide loss is measured to be similar to 1dB/cm at both 1 THz and 2.5 THz

SOI-based micro-mechanical terahertz detector operating at room-temperature

We present a micro-mechanical terahertz (THz) detector fabricated on a silicon on insulator (SOI) substrate and operating at room-temperature. The device is based on a U-shaped cantilever of micrometric size, on top of which two aluminum half-wave dipole antennas are deposited. This produces an absorption extending over the $\sim 2-3.5$THz frequency range. Due to the different thermal expansion coefficients of silicon and aluminum, the absorbed radiation induces a deformation of the cantilever, which is read out optically using a $1.5\mu$m laser diode. By illuminating the detector with an amplitude modulated, 2.5 THz quantum cascade laser, we obtain, at room-temperature and atmospheric pressure, a responsivity of $\sim 1.5 \times 10^{8}$pm/W for the fundamental mechanical bending mode of the cantilever. This yields an noise-equivalent-power of 20 nW/Hz$^{1/2}$ at 2.5THz. Finally, the low mechanical quality factor of the mode grants a broad frequency response of approximately 150kHz bandwidth, with a response time of $\sim 2.5\mu$s

Mise au point d'une typologie de combustibles pour la Basse Provence calcaire

La typologie du combustible est un outil utilisé par les gestionnaires des milieux naturels soumis aux incendies dans de nombreux pays et massifs subissant ce risque. Cet outil permet d'intégrer le comportement du feu dans la gestion des milieux et dans la planification, à l'échelle d'un massif forestier. Ces typologies caractérisent la répartition verticale et horizontale de la végétation, ainsi que sa biomasse, éléments déterminants du comportement du feu, en milieu naturel. Le Cemagref d'Aix-en Provence, sur la base de près de 150 descriptions de végétation situées en Basse Provence calcaire, a bâti une typologie des structures de végétation et a pu caractériser le comportement du feu, dans chacun des onze types de combustibles construits

Nonequilibrium plasmons in optically excited semiconductors

An analysis of the nonequilibrium plasmon spectrum of optically excited semiconductors is presented. It is shown that semiconductors with preexisting carrier populations, due, e.g., to a prepump or doping, may exhibit a rich collective excitation spectrum including additional plasmon modes. If these modes are weakly damped they give rise to an essential acceleration of thermalization processes. It is found that the most favorable conditions for this effect to appear are low temperature and p doping. These theoretical predictions are fully confirmed by results of comprehensive pump-probe experiments on bulk GaAs in the presence of a prepump and in doped samples

Observation of self-mode-locked pulses in terahertz quantum cascade lasers with real-time intracavity self-detection

Mode-locking operation and multimode instabilities in Terahertz (THz) quantum cascade lasers (QCLs) have been intensively investigated during the last decade. These studies have unveiled a rich phenomenology, owing to the unique properties of these lasers, in particular their ultrafast gain medium. Thanks to this, in QCLs a modulation of the intracavity field intensity gives rise to a strong modulation of the population inversion, directly affecting the laser current. In this work we show that this property can be used to monitor in real-time the temporal dynamics of multimode THz QCLs, using a self-detection technique combined with a broadband real-time oscilloscope. We study a 4.2THz QCL operating in free-running, and observe the formation of current pulses associated with trains of self-mode-locked optical pulses. Depending on the current pumping we find alternating regimes of unstable and stable pulse trains, respectively at the fundamental cavity repetition rate and its second harmonic. We interpret these measurements using a set of effective semiconductor Maxwell-Bloch equations that qualitatively reproduce the fundamental features of the laser dynamics, and also provide evidence in support of the solitonic nature of the observed pulses

Broadband terahertz heterodyne spectrometer exploiting synchrotron radiation at megahertz resolution

International audienceA new spectrometer allowing both high resolution and broadband coverage in the terahertz (THz) domain is proposed. This instrument exploits the heterodyne technique between broadband synchrotron radiation and a quantum cascade laser (QCL) based molecular THz laser that acts as the local oscillator (LO). Proof of principle for exploitation for spectroscopy is provided by the recording of molecular absorptions of hydrogen sulfide (H 2 S) and methanol (CH 3 OH) around 1.073 THz. Ultimately, the spectrometer will enable to cover the 1-4 THz region in 5 GHz windows at Doppler resolution

Amélioration de la connaissance des causes d'incendie de forêt et mise en place d'une base de données géoréférencées

Dans le cadre du programme Forest Focus, le Cemagref d'Aix-en-Provence a réalisé un guide technique intitulé « Amélioration de la connaissance des causes de départ de feu de forêt » et l'agence MTDA a développé le prototype d'un module de saisie et de cartographie interactive des incendies de forêt. Cet article présente la méthode d'investigation de recherche des causes de départ de feu adaptée au contexte méditerranéen français ; un encadré concerne spécifiquement le module de saisie et de cartographie interactive permettant d'alimenter une base de données géoréférencées